Here is a guide to help you fit a BSC threaded external bearing bottom bracket, one of the most common standards on MTBs.
- Time: 30 min
- Level: Intermediate
- Tools: External bottom bracket tool | Wire brush | Grease
Steps
- Run a brush through the bottom bracket shell of your frame to remove any potential swarf or burrs from machining.
- Grease the threads of the MTB frame and those of the bottom bracket.
- Hand-thread the right-hand side of the bottom bracket anticlockwise. Finish tightening with the bottom bracket tool.
Probikeshop tip: as the thread is very fine, only use the bottom bracket tool once you are certain the bottom bracket is properly engaged.
- Then hand-thread the left-hand side of the bottom bracket clockwise, followed by the bottom bracket tool for the final tightening.
All that remains is to fit your crankset.
Découvrez tous nos conseils & Tutoriels
MTB - Bottom Brackets and Bearings
-

SRAM DUB BSA 73mm Bottom Bracket
Regular price 258,00 SEKRegular priceUnit price perSale price 258,00 SEK -
SRAM DUB PRESSFIT 89/92mm Bottom Bracket
Regular price 422,00 SEKRegular priceUnit price perSale price 422,00 SEK -
Bottom Bracket SHIMANO MT501 BSA
Regular price 223,00 SEKRegular priceUnit price perSale price 223,00 SEK -
SRAM DUB BSA 68/73 mm Bottom Bracket
Regular price 351,00 SEKRegular priceUnit price perSale price 351,00 SEK -
RACE FACE CINCH BSA/BSC 30mm Axle 68/73mm Bottom Bracket
Regular price 410,00 SEKRegular priceUnit price perSale price 410,00 SEK -

SRAM GXP TEAM BSA 68/73 mm Bottom Bracket
Regular price 351,00 SEKRegular priceUnit price perSale price 351,00 SEK -

Bottom Bracket SHIMANO MT800 Press Fit 89.5/92mm
Regular price 293,00 SEKRegular priceUnit price perSale price 293,00 SEK -

Bottom Bracket SHIMANO XTR SM-BB94-41A Press Fit 89.5/92mm
Regular price 410,00 SEKRegular priceUnit price perSale price 410,00 SEK



