How to fit mountain bike brake discs?

How to fit mountain bike brake discs?

Fitting a MTB disc is a simple operation, but requires a special tool.
Here's how.

 

  • Time : 15 min
  • Level : Easy
  • Tools : 25 Torx wrench (for 6-hole discs) | Torque wrench | Cassette wrench (for Center-Lock discs)

steps

  1. Place the disc on the mountain bike wheel wheel, respecting the direction of rotation indicated.
  2. Tighten the 6 bolts (with a T25 torx wrench) or the Center-Lock nut (with a cassette wrench) to the torque specified by the manufacturer, depending on the model you have. 
    Probikeshop tip: it's advisable not to grease the disc bolts, to avoid getting any on the brake track during use.

Your disc is now mounted. After running in, it's time to check the tightening. You are now ready to ride with your MOUNTAIN BIKE.

    Découvrez tous nos conseils & Tutoriels

    MTB - Brake Rotors

    • SHIMANO SM-RT66 6-Hole Disc

      SHIMANO SM-RT66 6 Hole Disc

      From 165.00 SEK
      From 165.00 SEK
    • MAGURA STORM HC 6-hole disc

      MAGURA STORM HC 6-hole disc

      From 154.00 SEK
      From 154.00 SEK
    • CLARKS Z8 6-Hole Disc

      CLARKS Z8 6-Hole Disc

      From 106.00 SEK
      From 106.00 SEK
    • SHIMANO SM-RT64 CENTER LOCK External drive

      SHIMANO SM-RT64 CENTER LOCK External drive

      From 154.00 SEK
      From 154.00 SEK
    • Disk CLARKS CL-A1 CENTER LOCK External

      Disk CLARKS CL-A1 CENTER LOCK External

      From 118.00 SEK
      From 118.00 SEK
    • SHIMANO SM-RT56 6-Hole Disc

      SHIMANO SM-RT56 6-Hole Disc

      142.00 SEK
      142.00 SEK
    • FORMULA 6-hole disc Silver

      FORMULA 6-hole disc Silver

      From 236.00 SEK
      From 236.00 SEK
    • SRAM HS2 Rounded 6-Hole Disc, Silver/Black

      SRAM HS2 6-hole disc

      From 377.00 SEK
      From 377.00 SEK
    View all